Installing ZCS
Download the zipped file from the website:
http://www.zoffi.net/MOBAZI/tipps/zimotool/zimottol.htm
Unzip the file and copy all into the same directory in which to find the program "ZSP" (Zimo_Soundprog.exe) - ie for example. at: C:\Program Files\ZIMO\ZSP \
Only then can you ZCS from the menu:
ZSP go directly to the program!
The ZIMO Sound Program "ZSP" is available at http://www.zimo.at
| ATTENTION! ZORC
with
this is
not
absolutely necessary!
Zorc
installed all the
necessary tools (also
ZCS)
in
its
own
program
path. ZCS can of course continue to be copied directly into the program path of ZSP |
ZCS.INI:
In zsc.ini can now specify the following:
C: \ Program Files \ ZIMO \ ZSP \
Zimo_Soundprog.exe
lang.de
1st Line indicates the program path of ZSP -
WARNING!
On
Windows 64
bits,
the
program
is
installed
by
default
in
the
path for
the 32
programs!
2nd Line indicates the program name from ZSP
3rd Line indicates the language (lang.de or lang.en) of ZCS at
The settings refer to the default location of ZSP under W7 32Bit.
These entries must be changed as needed (the INI but it must always look like that!)
Since from VISTA / W7 can not be written directly in the program directory, eg first to the INI copied to the Desktop, then there e.g. with Notepad can be modified, stored and then copied back to back in the program directory!
Operation
Both programs can be invoked in parallel (ie simultaneously) - although the program that finally the respective opened ZPR file also stores the last actual data sets therein!
It does not show all tabs (TAB) - with the right arrows above to scroll the tabs left and right:
